Say Goodbye to the water and hauling to land for the winter

The area we live in, South Coast Massachusetts, seems to want to haul boats out by end of October, probably as the weather can turn cold and windy anytime.
We have to do what needs to be done to the boat before it is hauled out. Holding tanks need to be pumped, we have some water leakage in the bilge that we need to figure out while in the water.  Luckily, we may be able to store "Puffin" in our side yard and ready it for our May trip. In our yard we can work on the boat at our own pace.
Dean is getting the boat ready to have the masts un stepped and hauled to it's resting place for the winter months before our Great Loop journey. Taking down the sails and booms is step 1. Disconnecting any wires, connections that are in the mast is step 2.
We reconnected the auto pilot for the stove and oven so are ready for cooking inside aboard. The stove is powered by propane that is stored outside the cabin in a nook in the pilot house. He also tried the heater for the cabin and it works fine- powered by diesel fuel.
Boat is out of the water, settling on land for the winter.
Will attach pictures in next blog.
Sorry this is so late, we had new grandchildren arrive. twins on 17th.

Comfort and Convenience while living aboard

We spoke with a friend who lived on a 42"sailboat with his wife and 2 children-this is what he had to say.
Outfit your boat as if it were your home. Comfort is key and convenience for cooking, communicating.
Make your berth like your bedroom using comfort items that are easy to maintain. Flannel sheets are good for all seasons and easy to wash and dry without a dryer. Remember quilts, comforters for those chilly days and nights. A net hammock is good for towels, sheets, and extra blankets, also clothing up off the bunks and out of the way. Many pillow cases can be stuffed with extras and used in the main cabin or outside for lounging.  In the galley and dining area use another hammock for crackers, pastas, snacks and other items that don't have to be kept cool, cold,  and hanging tiered baskets for fruits and vegetables.
Dean is listing mechanical and technical items to be done before our trip in May 2017.
Solar panels, outline for the chart plotter (I-Pad or other small laptop), LED lighting where possible, wind turbine, any advantage to use more natural resources for traveling.  He also wants to get another anchor for areas that may have different bottoms to anchor in. We will be in fresh waters for the majority of our trip and anchoring circumstances may be different than ocean waters.
Many of our friends and neighbors are excited for our adventure and may be meeting us along our way. We hope to have some companion boats to travel parts of the trip with. Some 100 boats a year make this trip, all sizes from small sailboats to large power cruisers.
Next- Hauling our boat out for the winter, to our yard, and getting ready for the Great Loop Trip.

Puffin Travel Adventures at Cuttyhunk Island

Our first longer overnight getting used to the boat before our Great Loop venture in the Spring- May 2017.
We ventured outside the hurricane barrier about 2 1/2 to 3 hours from New Bedford Harbor to a little island, Cuttyhunk, at the western  end of the Elizabeth Islands, a chain of islands extending west from Woods Hole in Falmouth,.  This island is close to Cape Cod (Woods Hole), Martha's Vineyard (8 miles) and a little further, to Nantucket. On a clear and bright sunny day, one can see from the Bourne Bridge connecting the mainland to Cape Cod, down the shore line to Rhode Island. The trip was great, beautiful weather, motoring at about 6.5-7 knots, for approximately 14 miles total.
Several ledges, Phinney Rock, Great Ledge, and Wilkes Ledge to name a few, appear along the course to Cuttyhunk forcing the skipper to stay  alert to keep the boat in deeper waters until you reach Penikese, a small island in front of Cuttyhunk, and the mouth of Cuttyhunk Harbor. There are two separate mooring fields to use in the Harbor, some in shallow water. We decided to bypass these and go in to Cuttyhunk Pond. Incidentally, Penikese was formerly used as a leper colony, then a home for troubled boys.
Once in the harbor you can see an opening leading into Cuttyhunk Pond with moorings and dock slips to the very small town of Gosnold.  Cuttyhunk Island is part of the town of Gosnold. We arrived on a Friday afternoon after the busy summer season and made our way through the narrow and shallow channel to the pond. We picked up a mooring, had dinner on the grill then dinghied into town for a little tour. Gosnold has under 20 residents in the winter, yet offers Library, Schooling, Methodist Church, Post Office, Town Meeting Hall, and Cuttyhunk Market.   During the summer  the town swells with seasonal residents, both on land and in the water. There are rental homes and apartments during the season plus Cuttyhunk Fishing Club Bed & breakfast Inn, and Avalon( The Inn at Cuttyhunk). Many homes are multigenerational dating back to the early 1900's. Cuttyhunk Ferry brings visitors to the Island at 9:00 am and leaves at 3:00pm weekdays for New Bedford. One needs to check with the Ferry company for weekend times. Transportation on the island is mostly by 4 wheel ATV's and golf carts, or bicycling or walking. There are very few cars or trucks on the island

Cuttyhunk Island has a small beach, a great harbor, good fishing, some beautiful hiking trails- I have pictures from the top of the hill.
Shellfish Farms "Floating" Raw Bar delivers to your boat. Cuttyhunk Oysters delivers meals to your boat also. Cool!!
There are a few other places to eat, Cuttyhunk Corner Store, and of course, Ice Cream.










Almost September and here it is

It has been a busy summer with family and friends, not much time for getting the boat ready for adventures and ventures. Not boating much this summer. It seems to have passed too quickly. Most of the boat is ready for travel. We ordered a replacement battery holder for the stove igniter, ready to install. Put off working on the antenna for the top of the mast and installing a new mast head light until the mast is on the ground end of season.

Just recently we had the remnants of Hurricane Hermine. It was not too bad on our South Coast, the winds were from the N NE.15-25 mph.  We secured Puffin from the winds by adding additional bow, stern and spring lines. Dean went to the boat at our slip many times to make sure we and others were secured for no damage to the boats.
We have made a new list of boat items we want to accomplish this winter while out of water to make the boat comfortable and tech savvy for our Great Loop trip next spring.
We need to have a chart for our expenses while traveling and those at home still being paid. Someone on Sailblogs.com just posted their boat travel expenses for 2016 so far.
These expense charts give a wealth of information generalized for the Great Loop trip.
You can find these charts on various sites including AGLCA site.
Back to the List:
1) Puffin is a ketch sailboat, thus we have 2 masts- you can not have your masts up while traveling on the rivers and canals due to low bridges to pass under. Maximum height for the trip is either 15ft. 6 inches or  19ft depending on your route. We have to decide whether to take the main mast onboard, put up a small back mast for radar, radio, and mast light which can act as one crutch plus an additional crutch forward, or just leave the mast at home and motor the whole trip. I believe carrying both masts and booms, the majority of the trip in crutches above the pilot house will be too much gear overhead, and too much hassle and cost to take down, store on board then put up again in the Great Lakes and then again in the Gulf. Having the masts trucked to the Gulf to await our arrival is another option, but I think,an expensive one.
2) We would like to install 2 solar panels and a wind generator for energy independence on mooring or at anchor and change the lighting to LED.
3) Screens for ventilation in cabin windows and hatches are a must as we will be traveling where there are many insects I don't care to have inside the cabin and a ventilation system for the aft cabin.
4) Mount the dinghy davits so we don't have to drag the dinghy behind-especially handy in locks.
5) To ease the strain of many hours of piloting -an Auto Pilot
6) Inverter to change 12 V to 110, and
7) I-Pad for backup technology for the chart plotter and trip planning.
There are a few more items, but you get the idea- we have from now to spring to prep and be ready to roll - sail/motor to and up the Hudson River in May, 2017. Our boat will be stored in our yard so easy access for repairs and completing our list.

August 2016

Enjoying what little time we have for the Boat. As stated, life gets in the way. Working some and with 2 children pregnant and helping them care for their little ones, sometimes doesn't leave time for our time.
Dean- still working on the mast issues. Have mizzen and main sail in place, jib is not roller furling, so hank it on for each use. And still looking into electrical/technical issues or add-ons that would make our boat more energy efficient and independent for mooring and anchoring, such as LED lights, solar panels, and wind turbine among the options. The new masthead light is LED.
We have been out a few times so far this month, same areas, a little further reach.
Suzan's sister was in town so we motored around the area one day. We were going to take the boat to the Newport Jazz Festival and moor or anchor off around Fort Adams. There are some mooring/anchorage areas around Newport Harbor run by Old Port Marine Services that also offer launch services to and from the moorings. You can reach them on Radio VHF channel 68. Good to know. During the Festival it was "first come" so we opted for land parking. Next time we will take the boat over early for the weekend.
As mentioned in July's post, our first overnight was just off West Island to our north. Suzan is learning anchoring strategies to make overnights on anchor comfortable and worry free.

Ty at the helm

The 2nd overnight was Dean and his son in the same cove. That was quite an experience. We anchored off like last time. Grilled some burgers. Chatted over a beer, and I hit the sack around 11pm. Tyler (son) still up on deck enjoying the night air and peaceful setting. Wind about 7 knots out of the west. Suddenly about midnight I hear a disturbing sound-significantly more wind 25 to 30 knots whistling thru the rigging. As I came up on deck to get Tyler's stuff-cushions etc. under cover, the wind shifts quickly around to the north, giving the water a lot more fetch to build up seas and pointing the aft end of the boat at a spit of land not more than 400 to 500 feet  away and shallow water a lot closer than that, leaving  very little maneuvering room if the anchor were to let go or drag! Quite scary I must say. As expected, the waves built up very quickly, putting more strain on the anchor and rode. We both put on life jackets and waited it out in the cockpit, me at the helm, ready to start the engine to prevent us from grounding. Then the rain came, knocking down the waves and calming things a bit. Not long after, the wind died off and things eased back to normal. Thank God we set the anchor well and gave plenty of scope so Puffin held her own. So glad Suzan wasn't there to suffer through that!

Hammock with a view

The following morning was fogged in but cleared off early and presented another fine day.
Our zinc on the propeller shaft is being eaten quickly and fell off in my hand on an inspection dive, due to the salt water and stray electrical currents in New Bedford harbor. A day later, with a friend on board to keep an eye out, I installed a new zinc. We are learning.
August is almost gone and we haven't spent nearly the time we want with and on the boat. Still, September and October here in Southern New England offer nice boating time.

New Bedford Hurricane Barrier

Tidbit of Information for those who don't know the Hurricane Barrier History

Largest Hurricane Barrier in the World

Started Planning in 1957, Construction in 1962 and Completion in 1966, creating one of the safest harbors for commercial and recreational boats on the East Coast.

High and Wide as the Great Wall of China

The New Bedford Hurricane Protection Barrier lies across New Bedford and Fairhaven Harbor. It is approximately 50 miles south of Boston. The project protects about 1,400 acres in New Bedford, Fairhaven, and Acushnet from tidal flooding associated with hurricanes and coastal storms. This acreage is thickly settled with industrial and commercial properties, particularly along the waterfront and the shores of the Acushnet River. The area represents about 80 percent of land flooded in the September 1938 and August 1954 hurricanes, the latter storm causing $8.3 million in flood damages.

Construction of the New Bedford Hurricane Protection Barrier began in October 1962 and was completed in January 1966, costing $18.6 million. The project required the relocation of power cables, modification of sewerage and drainage facilities, and acquisition of a small boat yard, several buildings, and about 36 acres of land. The city maintains the project, with the exception of the navigation gates and the barrier extending across New Bedford and Fairhaven Harbor which are operated and maintained by the Corps. The project is divided into three principal features: a barrier extending across New Bedford and Fairhaven Harbor with an extension dike on the mainland; Clarks Cove Dike in New Bedford; and Fairhaven Dike. The project has prevented $24.1 million in flood damages and coastal tidal surge since it was built (as of September 2011).

The barrier extending across the harbor consists of a 4,500-foot-long earthfill dike with stone slope protection. The barrier has a maximum elevation of 20 feet and a 150-foot-wide gated opening to accommodate commercial and recreational navigation. It also has two gated conduits that are each nine feet high and six feet wide. The extension dike starts at the western end of the main dike and stretches for 4,600 feet along Rodney French Boulevard East. It has a maximum elevation of 22 feet. The extension dike has three circular gated conduits with diameters of two, three, and four feet, and a street gate on Rodney French Boulevard East. 

Clarks Cove Dike consists of earthfill with stone slope protection. It is 5,800 feet long and extends around the north and east sides of the cove, tying to high ground at both ends. On the north side the dike has a maximum elevation of 22 feet, and on the east side the maximum elevation is 23 feet. The dike also has street gates at Rodney French Boulevard West and Cove Road, and a pumping station.

Fairhaven Dike consists of earthfill with stone slope protection. It starts at high ground near the foot of Lawton Street and runs easterly about 3,100 feet, with a maximum elevation of 20 feet. The dike also has a four-foot-diameter gated conduit.

Courtesy of US Army Corp of Engineers/New England District website

---

 

July 2016 Summer Fun and---

We really haven't had the time we want to spend on our boat this summer, so far. Seems like life gets in the way. In July we have gone outside the hurricane barrier a few times to visit Padanaram Harbor in Dartmouth. Also ventured to Mattapoiset waters, both along south coast Massachusetts Buzzard's Bay area offering some interesting cruising grounds, both busy and secluded. You can see the spires and steeples on some of the structures that Henry H. Rogers (Standard Oil in 1800's) had built while he was on the South Coast. You also see the wind turbines along the shore and estates of the rich and famous? don't know about that.
One of our girls came down with her children and husband to spend some time on the boat and go fishing. Her son, Toby, age 5, is really into fishing, mostly in fresh water. We took them out past the hurricane barrier and tried to catch a few- to no avail. None the less, it was a fun day just to be on the boat with family.
Dean-  A day later, I climbed the mast for our radio antenna issue and mast head light. I used a mast climber and ladder to reach the top, once there, I used a bosun's,
chair while working. Unfortunately the mast climber was for a smaller mast, thus too short by about 12 feet so I had to stand a 12 foot ladder on the cabin top, against the mast to reach it- very amateur, but it worked. the radio antenna had a badly corroded connector, so that has to be replaced and reconnected. The mast head light base, made of plastic, which sits atop the masthead was broken and corroded-  so we are taking the opportunity to get and install a new LED light. The one removed , probably original to the boat, is tri-color/ anchor with strobe.  The newer LED lights have deleted the strobe. We are moving toward having as much of the boat electrical power source done with energy efficient lighting (LED), solar panels, and perhaps some wind power.

So far our boat under motor seems to run quite smoothly and Suzan is getting used to the boats response to wave actions with our normal breezes of 10-15 mph. the sails are not yet attached as I wanted to finish the project at the top of the mast before attaching the sails for use.
 She is getting the galley, berths, and head organized with what we need to be comfortable for an extended stint aboard. Each time we venture out, we make a list of items that would work for us.

We've gone out again a few times down to a small harbor - Padanaram (South Dartmouth). It is a picturesque little harbor with many sailboats moored. Also ventured out of the hurricane barrier east toward Cape Cod. Stayed overnight in a little cove off West Island, dropped anchor and enjoyed the peace and quiet of a secluded anchorage and  beautiful sunset, sunrise and more stars than I have seen in a long time.
There are many islands and harbors to explore close to Cape Cod, Martha's Vineyard, and Nantucket. We can moor or anchor in at Cuttyhunk, the south western most island of the Elizabeth Island chain off Woods Hole in Falmouth, just 15 miles away from Fairhaven/New Bedford.
 Loving life on Buzzards Bay.