Liberty Park Anchorage to Milford

Sunrise over Lady Liberty and Manhattan

United Nations Headquarters

Colorful factory along East River

Stepping Stones Lighthouse off Great Neck, NY

Tug and Barge

      Rested but apprehensive about my trip up the East River I awoke early and was underway by 6am. By leaving this early I knew I had plenty of time to reach Hellgate on the East River at or just after slack water which was at 7:36am. Heading out under a mostly cloudy sky, I passed the Statue of Liberty as Lower Manhattan and the Battery came into view. At this hour of the day there was limited water traffic which made for a much more relaxed cruise across the Upper Bay, past Governors Island and into the East River. I meandered about in the lower East River between Manhattan and Brooklyn awhile, passing by ferry terminals for Staten and Governors Islands, the South Street Seaport, then the Brooklyn Bridge. Then Puffin passes under 3 more suspension bridges- the Manhattan, the Williamsburg and then the Queensboro which places me between Upper East Side and Roosevelt Island, just past the United Nations Headquarters, traveling at about 8 mph. By about 7:45am, the sun had come out to stay.  About 8am I have passed Hellgate and am now on a flood tidal current,  aiding my trip into Long Island Sound: speed has picked up to 9 mph with no change in throttle. Shortly I pass between North and South Brother Islands and put Rikers Island to starboard. By 8:40 Puffin is past Whitestone Bridge and by 9am she has passed under Throgs Neck Bridge and out of the East River into the western end of Long Island Sound. By getting the timing right on current ebb and flow past Roosevelt Island and Hellgate, the whole East River trip was a pleasure instead of a white knuckle ride on turbulent waters in my slow sailboat.

Execution Rocks Lighthouse off New Rochelle, NY            

By 9:15am, I was passing Manhasset Bay to starboard and Hart Island to port. As I worked my way eastward, I passed by several lighthouses marking shoals, ledges and islands; the occasional tug and barge, numerous pleasure and recreational fishing boats, a windjammer, and commercial clammers, draggers and fishing vessels. All in all a very pleasant day. I motored into Milford, CT at 4:15pm, a 10 hour 15 minute run of 55 nautical miles (63.3 statute miles).

Great Captain Island Lighthouse off Greenwhich, CT

Next leg of journey will be to Point Judith and Wickford, Rhode Island.

Penfield Reef Lighthouse off Fairfield, CT

4 weeks out for the Trip

Hi,
Getting you up to date with preparing for the Trip. We plan to start mid May, journey from our home in South Coast Massachusetts down through Long Island Sound, East River to New York Harbor, to continue our river journey up the Hudson, into the Erie Canal, then Oswego Canal into Lake Ontario, cross that to Kingston Canada, up the Rideau Canal to Ottawa, then down to Montreal at the St. Lawrence River. From there we go seaward on the St. Lawrence to Sorel where we enter the Richelieu River taking us to the US border and Lake Champlain. At the lower end of Lake Champlain, is the Champlain Canal which takes us back to the Hudson River to retrace our way home. We decided against making the Great Loop to Florida as we still have many items to change or update on our boat for a longer trip. This journey will take us about 2 months with all we want to see.

We purchased our boat(Puffin) 2 years ago from the original owner (1982). At that time, 2015, we still owned and operated a small Inn north of Boston, so were unable to put much needed time and effort into the boat. Last summer, 2016, we enjoyed a little time getting used to and sailing  Puffin, and also waited for 3 new grandchildren arriving in the early fall.

To date, we have spend as much $$$ as finances allow to get ready for this trip.
Last weekend, we spent a day at Defender Discount Marine www.defender.com  in Waterford, CT, for their Blowout Spring Sale. This place is huge, with lots of parking and a lot of everything for boats and boating, and on a Friday there were cars parked out to and on the main road at 11:00 am.
We find Defender has the lowest pricing on most marine items. You can also visit West Marine stores or online- higher priced, mostly for the pleasure boating consumer, Jamestown Distributers in Bristol, RI, (mostly an online presence with a small retail store) and Hamilton Marine in Maine.
The mast is painted and Dean is putting the radar, radio antenna, masthead light,
loudhailer/PA horn and searchlight on our 8 ft wooden mast. This shorter mast enables our boat to go under bridges and easier time with locks and canals. But because the radar dome will be installed on a slanted mast instead of vertical I had to customize the brackets to make it fit on the horizontal plane.
The toilet has new gaskets, is cleaned, and now reinstalled on the boat. Thank goodness for that. We purchased the parts needed from a supplier in England which shipped to us at a reasonable price.
The boat is uncovered so now we can clean out the lockers, discard what is not needed, reorganize and add what we need for our trip.
I, Suzan, have my lists for kitchen, bed, and bathroom supplies.  Each time I go to the grocery store, I can check items off my list.
One of the color schemes  I wanted was to get pillows and coverings to go with the dark green cushions and window curtains. The great color out this season is pea green or seafoam green, neither goes with Puffin's British green. So- fabric store it is, to make covers that co ordinate. A feat in itself, yet accomplished, using red and red/white accents.

Next time-launching and do sea trials of all systems on Puffin before our journey. And-- the kitchen pantry will be stocked.

Getting Closer to the Goal!!!

What we are working on-
Researching and ordering LED bulbs to replace existing incandescent one and new light fixtures.
Solar for power- do we put on pilot house roof or on dinghy davits or both, how many watts needed, how to incorporate in current electrical system etc. Davits have to be fitted to the back of the boat. Mounting brackets to be fabricated and attached to transom.

partly dis-assembled for repair

New parts such as seals and gaskets-for the head (toilet) parts from English supplier or US supplier, new toilet, or different composting toilet? After sorting it all, we have decided to go with the toilet we have as it is an upscale one Blakes Lavac, manufactured in England and were able to order parts from a supplier there. Dean is cleaning up the faucet/shower for the head as the newer models look like the one we have so polishing it up is a good way to go and save a few dollars.

What has been done---
The 8 ft mast is almost done. Then we will run the antenna, radar, mast head light wiring and be ready to mount on "Puffin" in front of the pilot house.
This mast will enable us to cruise without the tall masts and sails to give us clearance under bridges enroute. This trip will be mostly on rivers, canals, small lakes so not much need for sails, just cruising and enjoying the countryside by water instead of land.
We ordered  a new captain's chair and also a side chair for pilot house seating, some new marine dishware with bottoms that do not slide, and other items for the galley (kitchen). Getting ready to cover some pillows and order some foam for cushions and new carpet.
It's a slow process as retirement finances are limited.
For this trip, we are shortening our "Great Loop" trip to the eastern part-Hudson River, Erie and Oswego Canals.Then Lake Ontario to Rideau Canal system, meandering up to Ottowa, Ottowa River to Montreal. Down the St. Lawrence(heading northeast) to Sorel and the Richelieu Canal/river system, taking us into Lake Champlain and subsequently into the Hudson River system again. We are giving our trip about 2 months starting mid May, may be a little more. In the future we will continue more of the Loop.

Checking off the List for the Trip

The list for getting ready. Our time is shorter to launch, we will be leaving first to mid May to traverse Long Island Sound to New York and the Hudson River..
We ordered and now have a new radio with a DSC button (all new marine radios do) for emergencies, GPS and AIS to assist in  collision avoidance.
Dean is working on fabricating an 8ft. wooden mast to hold the radar dome, mast head light, radio antenna and perhaps deck lights.
We have been reading about solar panels and it seems 2 -160 watt panels, will be adequate to charge a battery bank for powering a small refrigerator, lights, laptop computer and fans while at anchor if used moderately. An inverter will be necessary for the laptop and a few other tools we may use.
A wind generator is helpful on days when there is not sufficient sun, and at night if there is sufficient  wind, but is probably not in the budget
 Our chart plotter uses C-Map charts. Dean has also been talking with Jeppesen www.jeppesen.com for a C-MAP for Lakes and Rivers. That combined with our East Coast and Gulf C-MAP will cover our full trip.
To travel outside the US, including Canada we had to obtain an FCC ships station license (includes an MMSI number $220.00, and a restricted radio operators license ($70.00), not cheap but necessary. Many have suggested getting the license through BoatUS or SeaTow. They will get you the restricted radio operator license for free if you are a member, but their license is only good within the US, not good in Canada, Mexico or the Islands.
Ordered some items from Defender Discount Marine Supplies  www.defender.com 
Purchased 2 new House deep cycle batteries from KMart, which is going out of business in our town.

Next, to order our pilot chairs- 2, as one is needed on the passenger side so the commander can see out the pilot house windows on those long cruises up or down rivers and canals.
I would like to order new carpet, we will see as our list is getting expensive with some of the extras that are required.
To fabricate the dinghy davit mounting brackets is $500.
New dock lines- some of ours are original three strand rope from 1980's-old school.

Unless you have a boat already tailored for the Great Loop or cruising, to install what you want and need before your trips, outfitting with these items can get expensive.
In  the next 2 months, getting our cell phones, data, and internet set up for cruising outside US waters.
GPS and paper maps, mapping your trip including expenses- locks, canals, docking,fuel, pump outs.
Stay tuned

Working on the List for the Great Loop

So far we have a list.
Now we are doing the research for pricing and what else is needed for each project; starting to order a few things and starting work on a few projects. Some will be as simple as replacing old with new. Although, old may be 1980's, i.e. original, 2000- newer, but not used very much so perhaps dried and cracked due to non use as in rubber gaskets and some other parts.  Luckily we have a newer engine with not too many hours on it, so in good shape as the majority of the "Great Loop" will be motored.
Dean purchased wood to make the shorter mast to carry the radar, radio antenna and fore deck lights, since we will be leaving the main and mizzen at home.
Looks like we may either use our 1980's "antique" radar and monitor or purchase a newer unit.
Because our boat is a Coaster 33 English North Seas boat circa 1982, many of the electronics and other parts are original, most in good shape, but old. It is very hard to find replacement parts for older equipment.
The toilet is a Baby Blake from England and you can only buy parts from their supplier in England or one in Florida. A complete repair kit costs as much as many newer toilets.The toilet(head) works fine, a little hard to pump due to stiff gaskets and a build up of salts.
The carpet on the floors, yes, carpet,
plywood underneath, can be replaced by newer and lighter color, ours is dark brown.  The new carpet will come in 6' or 8 ' X 12ft piece. We then have to take the old out. Fortunately, it is not glued down, as there are compartments under that we need access to, to cut the new to fit. Not too bad a job.
I need to measure the porthole windows to make screens  so we don't get no-see-ums and mosquitoes inside. Why weren't these windows made with screens?  We also want to put a hatch in the back berth for ventilation. The existing vent there now does not facilitate much air movement so very warm and perhaps humid to sleep in.
I am looking at new foam 2-3 " thick for a cushion to put on top of what is there for more comfort. And nautical fabric, that will go with Hunter Green cushions and curtains. Any suggestions? Most of the greens are spring green or off green that does not go well with our green. Also new dishes, I had purchased some melamine dishes at a store and through research found there is dishware designed for marine craft with non slip bottoms and smaller mugs to fit in the attached racks.

On land, nice and cozy for the winter, easy to work on.

Puffin is wintering in our yard. How awesome is that? Why, might you ask, do we want our boat so readily accessible?  We can winterize and do the myriad thing necessary to prepare Puffin for our trip in 2017, right here at home instead of carrying tools and supplies back and forth to a boatyard. Additionally, it is less expensive than boatyard storage.

Dean piloted Puffin around the corner to the Niemiec Marine boat ramp and hauled by Brownell Services, Mattapoisett, Ma. Specialized boat movers and sailboat transport services, South Coast Massachusetts. The Brownell people were awesome, Jonathan the hauler, knew and handled everything to do with getting an 18,000 lb. sailboat's masts unstepped and the boat safely to it's destination. We would highly recommend their services including their stands - they manufacture boat stands for all sizes of boats-"Best Boat Stands Ever Made" many distributers worldwide.

Now to our coming out of the  water experience.
As we came around the corner to the boat ramp, Jonathan was there with trailer backed into the water waiting. He had told Brownell he'd like to haul our boat as it was an older boat from England with classic design. The boat is a North Seas trawler style sailboat, very sturdy and rugged, with nice lines. Dean motored the boat onto the trailer with the hauler's direction, and was pulled up the ramp to a resting place at Niemiec for unstepping (taking down) the masts.  When that was finished, the masts were strapped to each side of the trailer ready for the short journey to place Puffin in our yard.

The driveway was empty, the fence was taken out, and low branches were cut from the trees. Jonathan backed the trailer with boat diagonally into position as close to the side fence as possible while being able to drive the empty trailer straight out of the yard without touching the boat. For us it was a feat, for the hauler, all in an afternoon's work.,

The boat was backed into the yard diagonally, not as close to the side fence as I would have originally liked and actually where it ended is a better position, nestled among the trees before the back deck with masts laid along side on stands.
Now we can get electric to the boat and ladder to reach the side deck to organize during the winter.
Now comes winterizing water tanks, lines, engine, and whatever else is needed.

Say Goodbye to the water and hauling to land for the winter

The area we live in, South Coast Massachusetts, seems to want to haul boats out by end of October, probably as the weather can turn cold and windy anytime.
We have to do what needs to be done to the boat before it is hauled out. Holding tanks need to be pumped, we have some water leakage in the bilge that we need to figure out while in the water.  Luckily, we may be able to store "Puffin" in our side yard and ready it for our May trip. In our yard we can work on the boat at our own pace.
Dean is getting the boat ready to have the masts un stepped and hauled to it's resting place for the winter months before our Great Loop journey. Taking down the sails and booms is step 1. Disconnecting any wires, connections that are in the mast is step 2.
We reconnected the auto pilot for the stove and oven so are ready for cooking inside aboard. The stove is powered by propane that is stored outside the cabin in a nook in the pilot house. He also tried the heater for the cabin and it works fine- powered by diesel fuel.
Boat is out of the water, settling on land for the winter.
Will attach pictures in next blog.
Sorry this is so late, we had new grandchildren arrive. twins on 17th.

Comfort and Convenience while living aboard

We spoke with a friend who lived on a 42"sailboat with his wife and 2 children-this is what he had to say.
Outfit your boat as if it were your home. Comfort is key and convenience for cooking, communicating.
Make your berth like your bedroom using comfort items that are easy to maintain. Flannel sheets are good for all seasons and easy to wash and dry without a dryer. Remember quilts, comforters for those chilly days and nights. A net hammock is good for towels, sheets, and extra blankets, also clothing up off the bunks and out of the way. Many pillow cases can be stuffed with extras and used in the main cabin or outside for lounging.  In the galley and dining area use another hammock for crackers, pastas, snacks and other items that don't have to be kept cool, cold,  and hanging tiered baskets for fruits and vegetables.
Dean is listing mechanical and technical items to be done before our trip in May 2017.
Solar panels, outline for the chart plotter (I-Pad or other small laptop), LED lighting where possible, wind turbine, any advantage to use more natural resources for traveling.  He also wants to get another anchor for areas that may have different bottoms to anchor in. We will be in fresh waters for the majority of our trip and anchoring circumstances may be different than ocean waters.
Many of our friends and neighbors are excited for our adventure and may be meeting us along our way. We hope to have some companion boats to travel parts of the trip with. Some 100 boats a year make this trip, all sizes from small sailboats to large power cruisers.
Next- Hauling our boat out for the winter, to our yard, and getting ready for the Great Loop Trip.

Puffin Travel Adventures at Cuttyhunk Island

Our first longer overnight getting used to the boat before our Great Loop venture in the Spring- May 2017.
We ventured outside the hurricane barrier about 2 1/2 to 3 hours from New Bedford Harbor to a little island, Cuttyhunk, at the western  end of the Elizabeth Islands, a chain of islands extending west from Woods Hole in Falmouth,.  This island is close to Cape Cod (Woods Hole), Martha's Vineyard (8 miles) and a little further, to Nantucket. On a clear and bright sunny day, one can see from the Bourne Bridge connecting the mainland to Cape Cod, down the shore line to Rhode Island. The trip was great, beautiful weather, motoring at about 6.5-7 knots, for approximately 14 miles total.
Several ledges, Phinney Rock, Great Ledge, and Wilkes Ledge to name a few, appear along the course to Cuttyhunk forcing the skipper to stay  alert to keep the boat in deeper waters until you reach Penikese, a small island in front of Cuttyhunk, and the mouth of Cuttyhunk Harbor. There are two separate mooring fields to use in the Harbor, some in shallow water. We decided to bypass these and go in to Cuttyhunk Pond. Incidentally, Penikese was formerly used as a leper colony, then a home for troubled boys.
Once in the harbor you can see an opening leading into Cuttyhunk Pond with moorings and dock slips to the very small town of Gosnold.  Cuttyhunk Island is part of the town of Gosnold. We arrived on a Friday afternoon after the busy summer season and made our way through the narrow and shallow channel to the pond. We picked up a mooring, had dinner on the grill then dinghied into town for a little tour. Gosnold has under 20 residents in the winter, yet offers Library, Schooling, Methodist Church, Post Office, Town Meeting Hall, and Cuttyhunk Market.   During the summer  the town swells with seasonal residents, both on land and in the water. There are rental homes and apartments during the season plus Cuttyhunk Fishing Club Bed & breakfast Inn, and Avalon( The Inn at Cuttyhunk). Many homes are multigenerational dating back to the early 1900's. Cuttyhunk Ferry brings visitors to the Island at 9:00 am and leaves at 3:00pm weekdays for New Bedford. One needs to check with the Ferry company for weekend times. Transportation on the island is mostly by 4 wheel ATV's and golf carts, or bicycling or walking. There are very few cars or trucks on the island

Cuttyhunk Island has a small beach, a great harbor, good fishing, some beautiful hiking trails- I have pictures from the top of the hill.
Shellfish Farms "Floating" Raw Bar delivers to your boat. Cuttyhunk Oysters delivers meals to your boat also. Cool!!
There are a few other places to eat, Cuttyhunk Corner Store, and of course, Ice Cream.










Almost September and here it is

It has been a busy summer with family and friends, not much time for getting the boat ready for adventures and ventures. Not boating much this summer. It seems to have passed too quickly. Most of the boat is ready for travel. We ordered a replacement battery holder for the stove igniter, ready to install. Put off working on the antenna for the top of the mast and installing a new mast head light until the mast is on the ground end of season.

Just recently we had the remnants of Hurricane Hermine. It was not too bad on our South Coast, the winds were from the N NE.15-25 mph.  We secured Puffin from the winds by adding additional bow, stern and spring lines. Dean went to the boat at our slip many times to make sure we and others were secured for no damage to the boats.
We have made a new list of boat items we want to accomplish this winter while out of water to make the boat comfortable and tech savvy for our Great Loop trip next spring.
We need to have a chart for our expenses while traveling and those at home still being paid. Someone on Sailblogs.com just posted their boat travel expenses for 2016 so far.
These expense charts give a wealth of information generalized for the Great Loop trip.
You can find these charts on various sites including AGLCA site.
Back to the List:
1) Puffin is a ketch sailboat, thus we have 2 masts- you can not have your masts up while traveling on the rivers and canals due to low bridges to pass under. Maximum height for the trip is either 15ft. 6 inches or  19ft depending on your route. We have to decide whether to take the main mast onboard, put up a small back mast for radar, radio, and mast light which can act as one crutch plus an additional crutch forward, or just leave the mast at home and motor the whole trip. I believe carrying both masts and booms, the majority of the trip in crutches above the pilot house will be too much gear overhead, and too much hassle and cost to take down, store on board then put up again in the Great Lakes and then again in the Gulf. Having the masts trucked to the Gulf to await our arrival is another option, but I think,an expensive one.
2) We would like to install 2 solar panels and a wind generator for energy independence on mooring or at anchor and change the lighting to LED.
3) Screens for ventilation in cabin windows and hatches are a must as we will be traveling where there are many insects I don't care to have inside the cabin and a ventilation system for the aft cabin.
4) Mount the dinghy davits so we don't have to drag the dinghy behind-especially handy in locks.
5) To ease the strain of many hours of piloting -an Auto Pilot
6) Inverter to change 12 V to 110, and
7) I-Pad for backup technology for the chart plotter and trip planning.
There are a few more items, but you get the idea- we have from now to spring to prep and be ready to roll - sail/motor to and up the Hudson River in May, 2017. Our boat will be stored in our yard so easy access for repairs and completing our list.

August 2016

Enjoying what little time we have for the Boat. As stated, life gets in the way. Working some and with 2 children pregnant and helping them care for their little ones, sometimes doesn't leave time for our time.
Dean- still working on the mast issues. Have mizzen and main sail in place, jib is not roller furling, so hank it on for each use. And still looking into electrical/technical issues or add-ons that would make our boat more energy efficient and independent for mooring and anchoring, such as LED lights, solar panels, and wind turbine among the options. The new masthead light is LED.
We have been out a few times so far this month, same areas, a little further reach.
Suzan's sister was in town so we motored around the area one day. We were going to take the boat to the Newport Jazz Festival and moor or anchor off around Fort Adams. There are some mooring/anchorage areas around Newport Harbor run by Old Port Marine Services that also offer launch services to and from the moorings. You can reach them on Radio VHF channel 68. Good to know. During the Festival it was "first come" so we opted for land parking. Next time we will take the boat over early for the weekend.
As mentioned in July's post, our first overnight was just off West Island to our north. Suzan is learning anchoring strategies to make overnights on anchor comfortable and worry free.

Ty at the helm

The 2nd overnight was Dean and his son in the same cove. That was quite an experience. We anchored off like last time. Grilled some burgers. Chatted over a beer, and I hit the sack around 11pm. Tyler (son) still up on deck enjoying the night air and peaceful setting. Wind about 7 knots out of the west. Suddenly about midnight I hear a disturbing sound-significantly more wind 25 to 30 knots whistling thru the rigging. As I came up on deck to get Tyler's stuff-cushions etc. under cover, the wind shifts quickly around to the north, giving the water a lot more fetch to build up seas and pointing the aft end of the boat at a spit of land not more than 400 to 500 feet  away and shallow water a lot closer than that, leaving  very little maneuvering room if the anchor were to let go or drag! Quite scary I must say. As expected, the waves built up very quickly, putting more strain on the anchor and rode. We both put on life jackets and waited it out in the cockpit, me at the helm, ready to start the engine to prevent us from grounding. Then the rain came, knocking down the waves and calming things a bit. Not long after, the wind died off and things eased back to normal. Thank God we set the anchor well and gave plenty of scope so Puffin held her own. So glad Suzan wasn't there to suffer through that!

Hammock with a view

The following morning was fogged in but cleared off early and presented another fine day.
Our zinc on the propeller shaft is being eaten quickly and fell off in my hand on an inspection dive, due to the salt water and stray electrical currents in New Bedford harbor. A day later, with a friend on board to keep an eye out, I installed a new zinc. We are learning.
August is almost gone and we haven't spent nearly the time we want with and on the boat. Still, September and October here in Southern New England offer nice boating time.

New Bedford Hurricane Barrier

Tidbit of Information for those who don't know the Hurricane Barrier History

Largest Hurricane Barrier in the World

Started Planning in 1957, Construction in 1962 and Completion in 1966, creating one of the safest harbors for commercial and recreational boats on the East Coast.

High and Wide as the Great Wall of China

The New Bedford Hurricane Protection Barrier lies across New Bedford and Fairhaven Harbor. It is approximately 50 miles south of Boston. The project protects about 1,400 acres in New Bedford, Fairhaven, and Acushnet from tidal flooding associated with hurricanes and coastal storms. This acreage is thickly settled with industrial and commercial properties, particularly along the waterfront and the shores of the Acushnet River. The area represents about 80 percent of land flooded in the September 1938 and August 1954 hurricanes, the latter storm causing $8.3 million in flood damages.

Construction of the New Bedford Hurricane Protection Barrier began in October 1962 and was completed in January 1966, costing $18.6 million. The project required the relocation of power cables, modification of sewerage and drainage facilities, and acquisition of a small boat yard, several buildings, and about 36 acres of land. The city maintains the project, with the exception of the navigation gates and the barrier extending across New Bedford and Fairhaven Harbor which are operated and maintained by the Corps. The project is divided into three principal features: a barrier extending across New Bedford and Fairhaven Harbor with an extension dike on the mainland; Clarks Cove Dike in New Bedford; and Fairhaven Dike. The project has prevented $24.1 million in flood damages and coastal tidal surge since it was built (as of September 2011).

The barrier extending across the harbor consists of a 4,500-foot-long earthfill dike with stone slope protection. The barrier has a maximum elevation of 20 feet and a 150-foot-wide gated opening to accommodate commercial and recreational navigation. It also has two gated conduits that are each nine feet high and six feet wide. The extension dike starts at the western end of the main dike and stretches for 4,600 feet along Rodney French Boulevard East. It has a maximum elevation of 22 feet. The extension dike has three circular gated conduits with diameters of two, three, and four feet, and a street gate on Rodney French Boulevard East. 

Clarks Cove Dike consists of earthfill with stone slope protection. It is 5,800 feet long and extends around the north and east sides of the cove, tying to high ground at both ends. On the north side the dike has a maximum elevation of 22 feet, and on the east side the maximum elevation is 23 feet. The dike also has street gates at Rodney French Boulevard West and Cove Road, and a pumping station.

Fairhaven Dike consists of earthfill with stone slope protection. It starts at high ground near the foot of Lawton Street and runs easterly about 3,100 feet, with a maximum elevation of 20 feet. The dike also has a four-foot-diameter gated conduit.

Courtesy of US Army Corp of Engineers/New England District website

---

 

July 2016 Summer Fun and---

We really haven't had the time we want to spend on our boat this summer, so far. Seems like life gets in the way. In July we have gone outside the hurricane barrier a few times to visit Padanaram Harbor in Dartmouth. Also ventured to Mattapoiset waters, both along south coast Massachusetts Buzzard's Bay area offering some interesting cruising grounds, both busy and secluded. You can see the spires and steeples on some of the structures that Henry H. Rogers (Standard Oil in 1800's) had built while he was on the South Coast. You also see the wind turbines along the shore and estates of the rich and famous? don't know about that.
One of our girls came down with her children and husband to spend some time on the boat and go fishing. Her son, Toby, age 5, is really into fishing, mostly in fresh water. We took them out past the hurricane barrier and tried to catch a few- to no avail. None the less, it was a fun day just to be on the boat with family.
Dean-  A day later, I climbed the mast for our radio antenna issue and mast head light. I used a mast climber and ladder to reach the top, once there, I used a bosun's,
chair while working. Unfortunately the mast climber was for a smaller mast, thus too short by about 12 feet so I had to stand a 12 foot ladder on the cabin top, against the mast to reach it- very amateur, but it worked. the radio antenna had a badly corroded connector, so that has to be replaced and reconnected. The mast head light base, made of plastic, which sits atop the masthead was broken and corroded-  so we are taking the opportunity to get and install a new LED light. The one removed , probably original to the boat, is tri-color/ anchor with strobe.  The newer LED lights have deleted the strobe. We are moving toward having as much of the boat electrical power source done with energy efficient lighting (LED), solar panels, and perhaps some wind power.

So far our boat under motor seems to run quite smoothly and Suzan is getting used to the boats response to wave actions with our normal breezes of 10-15 mph. the sails are not yet attached as I wanted to finish the project at the top of the mast before attaching the sails for use.
 She is getting the galley, berths, and head organized with what we need to be comfortable for an extended stint aboard. Each time we venture out, we make a list of items that would work for us.

We've gone out again a few times down to a small harbor - Padanaram (South Dartmouth). It is a picturesque little harbor with many sailboats moored. Also ventured out of the hurricane barrier east toward Cape Cod. Stayed overnight in a little cove off West Island, dropped anchor and enjoyed the peace and quiet of a secluded anchorage and  beautiful sunset, sunrise and more stars than I have seen in a long time.
There are many islands and harbors to explore close to Cape Cod, Martha's Vineyard, and Nantucket. We can moor or anchor in at Cuttyhunk, the south western most island of the Elizabeth Island chain off Woods Hole in Falmouth, just 15 miles away from Fairhaven/New Bedford.
 Loving life on Buzzards Bay.

June 2016 Boat in the Water, in a slip, By the Bridge

Dean -
    Finally in the water and at a home for the season. Now we can start to get some items replaced, repaired, organized, and whatever else to do on a boat that is now your own and are getting ready for our boating venture May 2017. We purchased a mast stepper so I can climb the mast to finish my electrical wiring and attach the wind indicator, radio antenna, and mast head light. I have installed a new wind indicator guage in the pilot house and as in replacing most old with new, it doesn't fit with the other older gauges. I had to create a new casing out of some scrap mahogany I had on hand so it would match with the speed and depth finder already in place. Also had to clean and re-attach the depth finder transducer under the forward v-berth cabinets. The masts are up and booms in place.

Suzan-
    Meanwhile I am trying to organize the inside- galley, sleeping, and head items for our small trips this season to Martha's Vineyard, Block Island, Cuttyhunk, and Nantucket. It is much like camping supplies and food staples. I am reading some books by Joy Smith- "The Perfect First Mate" and "Kitchen Afloat". Very informative!!
We washed all the cushion covers and cleaned the galley, bathroom, and whatever else could be wiped down. Joy suggests dish detergent w/ non-chlorine bleach in a bucket of water.
We have an ugly brown carpet over plywood in the main cabin which I would like to replace with something more Nautical. Not to be found online, only the dull colors of grey and brown. Let's brighten it up a bit.
We decided to keep the cushion covers for now- Forest Green and accent with lighter colored pillows. Again, Do you think I can find canvas fabric that is a bit in the Nautical colors- something that has the green, blue, and red.Why is this so hard? Were all these designed  by men for men, who care more about the technical aspects than comfort and style? Boring!!
So much for now. This brings us to July.
Oh yes, friends from North of Boston came to visit and we motored outside our Hurricane Barrier for a cruise to Padanarum. Beautiful Harbor!! Very Yachty!