Getting Down to the Wire- Journey to begin

All the wiring for the Mast is in place. What a job that is/was. Much more complicated than expected. Mostly done except for testing to make sure all components- Radar, Radio, Deck Lights, Mast head Light, and Loud Hailer work.


My seat- across from the Captain's seat so whomever is not piloting, can sit up and see the water ahead and around.
Dean is working on the part that fits into the VBerth to make a fuller bed for sleeping. I have the foam, waiting to be cut.
Inverter we will take with us and wire in while traveling.
We will also take the extra batteries to be swapped out or added, as and if needed.
We are down to the last amounts of supplies to be put on board and then we are ready----


Our cat, Woodstock, is joining us on the journey. He has not been on Puffin in the water. We don't know how he will do and are prepared. He has been wearing a harness instead of a collar, that you can hook a leash to so if he goes overboard we can reel him in. As mentioned before, he also has a pet life jacket.

Still some things to accomplish on land---mail, bills to be paid, cleaning our home as we have guests staying while we are away. We are plant people so all of our indoor plants (20-25) are outside for awhile and some Dean has put the potted plant in the ground for moisture. We have placed them so there is ample morning light and should get moisture when it rains. I hope it is not like last summer- in July, August, September--no rain at all, we were in a drought. We contracted for someone to mow the lawn and neighbors will keep an eye out for anything unfamiliar around our home. We have nice neighbors.
By next week we will be on our journey on the Triangle Loop of the Great Loop.

Launched-- We are in the Water!!!

Long cold winter leads to a warmish and rainy spring and finally-time to go in the water! This all has to be co-ordinated with high tide so when backed into the water the boat doesn't run aground.

7:30 am sunny day, thank goodness, the trailer backs into our yard to take our boat "Puffin" to the water. Yea!!! Brownell, www.brownellsystems.com can't say enough good about the company. Their trailer guys and inside ladies are great to work with. "Puffin" was loaded onto the trailer. As the boat stands were removed, Dean was applying some touchup paint to where the stands held the boat. I guess this is typical if you paint the bottom while it is on stands. We launched at Niemiec. www.niemiecmarine.com and were on our way to the temporary slip at Acushnet River Safe boating Club before we take off in 2 weeks.The Nanni diesel started instantly.

We have been scrambling the last 2 weeks trying to get as much done on land before the boat hits the water.
We spent a day sanding and painting the bottom of the boat and black stripe at the water line. Boy did our backs hurt the next few days.
Dean did as much as he could to get our makeshift mast ready to put up and secure. The antenna for the radio, radar, loud hailer, spotlight all have to be cabled through the mast and deck, and attached to switches and power before we depart for our journey.
A few things left to finish- my passenger seat attached to the port side, opposite the Captain's chair, V berth insert made and installed for a larger more comfortable sleeping arrangement. The inverter needs to be installed and connected to the house batteries.
Most of our food supplies, cooking pans, dishware, towels and bedding, and bathroom supplies are onboard.
On my end, last  food supplies and fresh items and our clothing.
And do not forget, our cat is traveling with us. He has not been on the boat in the water. The first time will certainly be interesting. He has a harness and 2 leashes plus his own life jacket, yes, they do make them for animals. Ours was purchased at Defender Marine www.defender.com in CT.



Mast still on the Deck







Almost Launched!!

Puffin hits the water on May 8th.
Steadily preparing for the journey- The Triangle Loop- a northern side trip of the Great Loop- around May 20th.
Scrambling to get electronic things done on land, much easier.
Almost finished sanding the bottom and hope to paint as soon as it stops raining. We have had so much rain in the last few weeks, our yard looks like a jungle. Where was this rain when we really needed it?
Our 8 ft mast is propped in place, waiting for the OK from marine electronics  people that we are wiring correctly and then finishing up and securing in place in front of the pilot house.
Dean is attaching a first mate chair on the opposite side from the captain's chair and wheel so I or whomever not steering can sit high enough to see what is going on in front and all around us. He is making a wooden insert for the front V-berth so we can have a larger and more comfortable sleeping area. I have ordered the foam  we need ( a 28"X 28") piece that we can cut to size.
We are anxiously anticipating the arrival of davit mounting brackets so when attached to the boat the davits can swivel together across the back of the boat at a dock or slip so we don't get charged for an extra 3 feet or get tangled with another boat in tight docking situations.

I, Suzan, am gathering items from my extensive list, and finding places to stow onboard.
Bed and bath linens, food and food containers- non perishable food in plastic bags or containers and other containers for leftovers. My list is very long. I am trying to take as much as we can for most of the trip in non perishables so we only have to purchase fresh along the way. See Joy Smith's www.joysmith.net books on "The Perfect First Mate", and "Kitchen Afloat". Joy has lots of great ideas for making your boat your home away from home.
Dean has secured a place to dock Puffin where we can work on her until we start our journey.

4 weeks out for the Trip

Hi,
Getting you up to date with preparing for the Trip. We plan to start mid May, journey from our home in South Coast Massachusetts down through Long Island Sound, East River to New York Harbor, to continue our river journey up the Hudson, into the Erie Canal, then Oswego Canal into Lake Ontario, cross that to Kingston Canada, up the Rideau Canal to Ottawa, then down to Montreal at the St. Lawrence River. From there we go seaward on the St. Lawrence to Sorel where we enter the Richelieu River taking us to the US border and Lake Champlain. At the lower end of Lake Champlain, is the Champlain Canal which takes us back to the Hudson River to retrace our way home. We decided against making the Great Loop to Florida as we still have many items to change or update on our boat for a longer trip. This journey will take us about 2 months with all we want to see.

We purchased our boat(Puffin) 2 years ago from the original owner (1982). At that time, 2015, we still owned and operated a small Inn north of Boston, so were unable to put much needed time and effort into the boat. Last summer, 2016, we enjoyed a little time getting used to and sailing  Puffin, and also waited for 3 new grandchildren arriving in the early fall.

To date, we have spend as much $$$ as finances allow to get ready for this trip.
Last weekend, we spent a day at Defender Discount Marine www.defender.com  in Waterford, CT, for their Blowout Spring Sale. This place is huge, with lots of parking and a lot of everything for boats and boating, and on a Friday there were cars parked out to and on the main road at 11:00 am.
We find Defender has the lowest pricing on most marine items. You can also visit West Marine stores or online- higher priced, mostly for the pleasure boating consumer, Jamestown Distributers in Bristol, RI, (mostly an online presence with a small retail store) and Hamilton Marine in Maine.
The mast is painted and Dean is putting the radar, radio antenna, masthead light,
loudhailer/PA horn and searchlight on our 8 ft wooden mast. This shorter mast enables our boat to go under bridges and easier time with locks and canals. But because the radar dome will be installed on a slanted mast instead of vertical I had to customize the brackets to make it fit on the horizontal plane.
The toilet has new gaskets, is cleaned, and now reinstalled on the boat. Thank goodness for that. We purchased the parts needed from a supplier in England which shipped to us at a reasonable price.
The boat is uncovered so now we can clean out the lockers, discard what is not needed, reorganize and add what we need for our trip.
I, Suzan, have my lists for kitchen, bed, and bathroom supplies.  Each time I go to the grocery store, I can check items off my list.
One of the color schemes  I wanted was to get pillows and coverings to go with the dark green cushions and window curtains. The great color out this season is pea green or seafoam green, neither goes with Puffin's British green. So- fabric store it is, to make covers that co ordinate. A feat in itself, yet accomplished, using red and red/white accents.

Next time-launching and do sea trials of all systems on Puffin before our journey. And-- the kitchen pantry will be stocked.

Getting Closer to the Goal!!!

What we are working on-
Researching and ordering LED bulbs to replace existing incandescent one and new light fixtures.
Solar for power- do we put on pilot house roof or on dinghy davits or both, how many watts needed, how to incorporate in current electrical system etc. Davits have to be fitted to the back of the boat. Mounting brackets to be fabricated and attached to transom.

partly dis-assembled for repair

New parts such as seals and gaskets-for the head (toilet) parts from English supplier or US supplier, new toilet, or different composting toilet? After sorting it all, we have decided to go with the toilet we have as it is an upscale one Blakes Lavac, manufactured in England and were able to order parts from a supplier there. Dean is cleaning up the faucet/shower for the head as the newer models look like the one we have so polishing it up is a good way to go and save a few dollars.

What has been done---
The 8 ft mast is almost done. Then we will run the antenna, radar, mast head light wiring and be ready to mount on "Puffin" in front of the pilot house.
This mast will enable us to cruise without the tall masts and sails to give us clearance under bridges enroute. This trip will be mostly on rivers, canals, small lakes so not much need for sails, just cruising and enjoying the countryside by water instead of land.
We ordered  a new captain's chair and also a side chair for pilot house seating, some new marine dishware with bottoms that do not slide, and other items for the galley (kitchen). Getting ready to cover some pillows and order some foam for cushions and new carpet.
It's a slow process as retirement finances are limited.
For this trip, we are shortening our "Great Loop" trip to the eastern part-Hudson River, Erie and Oswego Canals.Then Lake Ontario to Rideau Canal system, meandering up to Ottowa, Ottowa River to Montreal. Down the St. Lawrence(heading northeast) to Sorel and the Richelieu Canal/river system, taking us into Lake Champlain and subsequently into the Hudson River system again. We are giving our trip about 2 months starting mid May, may be a little more. In the future we will continue more of the Loop.

Checking off the List for the Trip

The list for getting ready. Our time is shorter to launch, we will be leaving first to mid May to traverse Long Island Sound to New York and the Hudson River..
We ordered and now have a new radio with a DSC button (all new marine radios do) for emergencies, GPS and AIS to assist in  collision avoidance.
Dean is working on fabricating an 8ft. wooden mast to hold the radar dome, mast head light, radio antenna and perhaps deck lights.
We have been reading about solar panels and it seems 2 -160 watt panels, will be adequate to charge a battery bank for powering a small refrigerator, lights, laptop computer and fans while at anchor if used moderately. An inverter will be necessary for the laptop and a few other tools we may use.
A wind generator is helpful on days when there is not sufficient sun, and at night if there is sufficient  wind, but is probably not in the budget
 Our chart plotter uses C-Map charts. Dean has also been talking with Jeppesen www.jeppesen.com for a C-MAP for Lakes and Rivers. That combined with our East Coast and Gulf C-MAP will cover our full trip.
To travel outside the US, including Canada we had to obtain an FCC ships station license (includes an MMSI number $220.00, and a restricted radio operators license ($70.00), not cheap but necessary. Many have suggested getting the license through BoatUS or SeaTow. They will get you the restricted radio operator license for free if you are a member, but their license is only good within the US, not good in Canada, Mexico or the Islands.
Ordered some items from Defender Discount Marine Supplies  www.defender.com 
Purchased 2 new House deep cycle batteries from KMart, which is going out of business in our town.

Next, to order our pilot chairs- 2, as one is needed on the passenger side so the commander can see out the pilot house windows on those long cruises up or down rivers and canals.
I would like to order new carpet, we will see as our list is getting expensive with some of the extras that are required.
To fabricate the dinghy davit mounting brackets is $500.
New dock lines- some of ours are original three strand rope from 1980's-old school.

Unless you have a boat already tailored for the Great Loop or cruising, to install what you want and need before your trips, outfitting with these items can get expensive.
In  the next 2 months, getting our cell phones, data, and internet set up for cruising outside US waters.
GPS and paper maps, mapping your trip including expenses- locks, canals, docking,fuel, pump outs.
Stay tuned

Working on the List for the Great Loop

So far we have a list.
Now we are doing the research for pricing and what else is needed for each project; starting to order a few things and starting work on a few projects. Some will be as simple as replacing old with new. Although, old may be 1980's, i.e. original, 2000- newer, but not used very much so perhaps dried and cracked due to non use as in rubber gaskets and some other parts.  Luckily we have a newer engine with not too many hours on it, so in good shape as the majority of the "Great Loop" will be motored.
Dean purchased wood to make the shorter mast to carry the radar, radio antenna and fore deck lights, since we will be leaving the main and mizzen at home.
Looks like we may either use our 1980's "antique" radar and monitor or purchase a newer unit.
Because our boat is a Coaster 33 English North Seas boat circa 1982, many of the electronics and other parts are original, most in good shape, but old. It is very hard to find replacement parts for older equipment.
The toilet is a Baby Blake from England and you can only buy parts from their supplier in England or one in Florida. A complete repair kit costs as much as many newer toilets.The toilet(head) works fine, a little hard to pump due to stiff gaskets and a build up of salts.
The carpet on the floors, yes, carpet,
plywood underneath, can be replaced by newer and lighter color, ours is dark brown.  The new carpet will come in 6' or 8 ' X 12ft piece. We then have to take the old out. Fortunately, it is not glued down, as there are compartments under that we need access to, to cut the new to fit. Not too bad a job.
I need to measure the porthole windows to make screens  so we don't get no-see-ums and mosquitoes inside. Why weren't these windows made with screens?  We also want to put a hatch in the back berth for ventilation. The existing vent there now does not facilitate much air movement so very warm and perhaps humid to sleep in.
I am looking at new foam 2-3 " thick for a cushion to put on top of what is there for more comfort. And nautical fabric, that will go with Hunter Green cushions and curtains. Any suggestions? Most of the greens are spring green or off green that does not go well with our green. Also new dishes, I had purchased some melamine dishes at a store and through research found there is dishware designed for marine craft with non slip bottoms and smaller mugs to fit in the attached racks.